Datasheet 搜索 > 微控制器 > Microchip（微芯） > DSPIC30F6012A-30I/PT 数据手册 > DSPIC30F6012A-30I/PT 其他数据使用手册 1/10 页
器件3D模型￥ 10.419
DSPIC30F6012A-30I/PT 其他数据使用手册 - Microchip（微芯）
制造商:
Microchip（微芯）
分类:
微控制器
封装:
TQFP-64
描述:
MICROCHIP DSPIC30F6012A-30I/PT 芯片, 16位数字信号控制器, 30MHZ
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
DSPIC30F6012A-30I/PT数据手册
Page:
of 10 Go
若手册格式错乱，请下载阅览PDF原文件
© 2008 Microchip Technology Inc. DS80303E-page 1
dsPIC30F6011A/
6012A/6013A/6014A
The dsPIC30F6011A/6012A/6013A/6014A (Rev. B0)
samples that you have received were found to conform
to the specifications and functionality described in the
following documents:
• DS70157 – “dsPIC30F/33F Programmer’s
Reference Manual”
• DS70143 –
“dsPIC30F6011A/6012A/6013A/6014A Data
Sheet”
• DS70046 – “dsPIC30F Family Reference Manual”
The exceptions to the specifications in the documents
listed above are described in this section. The specific
devices for which these exceptions are described are
listed below:
• dsPIC30F6011A
• dsPIC30F6012A
• dsPIC30F6013A
• dsPIC30F6014A
dsPIC30F601XA Rev. B0 silicon is identified by
performing a “Reset and Connect” operation to the
device using MPLAB
®
ICD 2 within the MPLAB IDE.
The following text is then visible under the MPLAB ICD 2
section in the output window within MPLAB IDE:
MPLAB ICD 2 Ready
Connecting to MPLAB ICD 2
...Connected
Setting Vdd source to target
Target Device dsPIC30F6014A found,
revision = Rev 0x1040
...Reading ICD Product ID
Running ICD Self Test
...Passed
MPLAB ICD 2 Ready
The errata described in this section will be addressed
in future revisions of dsPIC30F6011A,
dsPIC30F6012A, dsPIC30F6013A and
dsPIC30F6014A silicon.
Silicon Errata Summary
The following list summarizes the errata described in
further detail through the remainder of this document:
1. Decimal Adjust Instruction
The Decimal Adjust instruction, DAW.b, may
improperly clear the Carry bit, C (SR<0>).
2. Output Compare Module in PWM Mode
Output compare will produce a glitch when loading
0% duty cycle in PWM mode. It will also miss the
next compare after the glitch.
3. Sleep Mode
Execution of the Sleep instruction (PWRSAV #0)
may cause incorrect program operation after the
device wakes up from Sleep. The current
consumption during Sleep may also increase
beyond the specifications listed in the device data
sheet.
4. I
2
C™ Module
The I
2
C module loses incoming data bytes when
operating as an I
2
C slave.
5. I/O Port – Port Pin Multiplexed with IC1
The Port I/O pin multiplexed with the Input Capture
1 (IC1) function cannot be used as a digital input
pin when the UART auto-baud feature is enabled.
6. I
2
C Module: 10-bit Addressing Mode
When the I
2
C module is configured for 10-bit
addressing using the same address bits (A10 and
A9) as other I
2
C devices, the A10 and A9 bits may
not work as expected.
7. Timer Module
Clock switching prevents the device from waking
up from Sleep.
dsPIC30F6011A/6012A/6013A/6014A Rev. B0 Silicon Errata
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
