LMC6082IN/NOPB 产品质量认证报告 - TI（德州仪器）

TI RoHS and Product Status Designation

TI certifies to the best of its knowledge that TI’s semiconductor products designated as “Pb-Free”, “RoHS Exempt”

or “Green” (defined below):

 Do not exceed Joint Industry Guide (“JIG”) Ed 4.1 Regulated Substance thresholds.

 Are compliant with the threshold requirements of the European Union’s Restriction on Use of Hazardous

Substances Directive, 2002/95/EC (“RoHS1”), as well as the recast Directive 2011/65/EU (“RoHS 2”).

TI defines its “Pb-free”, “RoHS Exempt” and “Green” products as follows:

Pb-Free: TI defines "Pb-Free" or “RoHS Compliant” to mean semiconductor products that are compliant with

the current RoHS 1 and RoHS 2 requirements for all 6 RoHS substances, including the requirement that

lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high

temperatures, TI “Pb-Free” and “RoHS Compliant” products are suitable for use in specified lead-free

processes. Product is also fully compliant to GADSL requirements for electronics

RoHS Exempt: TI defines “RoHS Exempt” to mean products that contain lead but are compliant with RoHS

Note: Proprietary materials must be in full compliance to known regulatory requirements as well

TI semiconductor products NOT designated as “Pb-Free” or “Green” comply with RoHS 1 and RoHS 2 and

China RoHS for all substances except Lead (Pb), which may be found in the leadframe plating or solder balls, or

in one of the RoHS exempt applications, 5(a), 7(a), 7(c)-I or 15. For semiconductor products containing lead,

the China RoHS EFUP is 50 years (www.ti.com/leadfree).

TI’s position is that its semiconductor products are considered components under RoHS 1 & RoHS 2. Therefore,

the CE marking, EU declaration of conformity, and internal product control provisions stipulated in Article 7 of

To the best of TI’s knowledge, its packing materials (boxes, trays, etc) comply with EU Directive 2004/12/EC for

Packaging and Packaging Waste Material.

TI bases its material content knowledge on information provided by third parties and has taken and continues to

take commercially reasonable steps to provide representative and accurate information but may not have

conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers

consider certain limited information to be proprietary, and thus CAS numbers and other limited information may

not be available for release. TI’s standard warranty and limitation of liability provisions of TI’s Standard Terms

and Conditions (available at http://www.ti.com/sc/docs/stdterms.htm) apply to the representations herein unless

otherwise provided by a written contract or other agreement signed by the parties.