Web Analytics
Datasheet 搜索 > 比较器 > TI(德州仪器) > LMC6762BIMX 数据手册 > LMC6762BIMX 其他数据使用手册 1/14 页
LMC6762BIMX
器件3D模型
23.333
导航目录
LMC6762BIMX数据手册
Page:
of 14 Go
若手册格式错乱,请下载阅览PDF原文件
LMC6762
Dual MicroPower Rail-To-Rail Input CMOS Comparator
with Push-Pull Output
General Description
The LMC6762 is an ultra low power dual comparator with a
maximum supply current of 10 µA/comparator. It is designed
to operate over a wide range of supply voltages, from 2.7V to
15V. The LMC6762 has guaranteed specs at 2.7V to meet
the demands of 3V digital systems.
The LMC6762 has an input common-mode voltage range
which exceeds both supplies. This is a significant advantage
in low-voltage applications. The LMC6762 also features a
push-pull output that allows direct connections to logic de-
vices without a pull-up resistor.
A quiescent power consumption of 50 µW/amplifier
(
@
V
+
= 5V) makes the LMC6762 ideal for applications in
portable phones and hand-held electronics. The ultra-low
supply current is also independent of power supply voltage.
Guaranteed operation at 2.7V and a rail-to-rail performance
makes this device ideal for battery-powered applications.
Refer to the LMC6772 datasheet for an open-drain version
of this device.
Features
(Typical unless otherwise noted)
n Low power consumption (max): I
S
= 10 µA/comp
n Wide range of supply voltages: 2.7V to 15V
n Rail-to-rail input common mode voltage range
n Rail-to-rail output swing (Within 100 mV of the supplies,
@
V
+
= 2.7V, and I
LOAD
= 2.5 mA)
n Short circuit protection: 40 mA
n Propagation delay (
@
V
+
= 5V, 100 mV
overdrive): 4 µs
Applications
n Laptop computers
n Mobile phones
n Metering systems
n Hand-held electronics
n RC timers
n Alarm and monitoring circuits
n Window comparators, multivibrators
Connection Diagram
8-Pin DIP/SO
01232001
Top View
Typical Application
01232016
Zero Crossing Detector
August 2000
LMC6762 Dual MicroPower Rail-To-Rail Input CMOS Comparator with Push-Pull Output
© 2004 National Semiconductor Corporation DS012320 www.national.com

LMC6762BIMX 数据手册

TI(德州仪器)
21 页 / 1.06 MByte
TI(德州仪器)
14 页 / 0.74 MByte
TI(德州仪器)
15 页 / 0.35 MByte

LMC6762 数据手册

National Semiconductor(美国国家半导体)
双路微功耗轨至轨输入CMOS比较器,带有推挽输出 Dual MicroPower Rail-To-Rail Input CMOS Comparator with Push-Pull Output
TI(德州仪器)
具有推挽输出的双路微功耗耗轨至轨输入 CMOS 比较器
TI(德州仪器)
LMC 系列 CMOS 比较器### 比较器,Texas InstrumentsTexas Instruments 系列电压比较器不仅包括传统单、双和四路比较器封装,还包括窗口比较器及过压和欠压监控器。 尽管比较器和运算放大器表面上是相似的设备,但它们在实用应用中的操作大大不同。 运算放大器适用于线性操作,附带适当反馈,而比较器定制用于快速切换且通常在开路模式中操作。 专用电压比较器具有明显较短的传播延迟,且可在饱和条件下具有更快的响应时间。 大多数比较器还更耐受高差分输入电压,且很多比较器具有开路集电极输出,从而可与其他设备并联操作。
TI(德州仪器)
LMC6762AIMX/NOPB 编带
TI(德州仪器)
具有推挽输出的双路微功耗耗轨到轨输入 CMOS 比较器 8-SOIC -40 to 85
TI(德州仪器)
TEXAS INSTRUMENTS  LMC6762BIM/NOPB  模拟比较器, 双路, 微功率, 2, 4 µs, 2.7V 至 15V, SOIC, 8 引脚
TI(德州仪器)
模拟比较器, 微功率, 2个比较器, 4 µs, 2.7V 至 15V, SOIC, 8 引脚
TI(德州仪器)
TEXAS INSTRUMENTS  LMC6762AIM  模拟比较器, 双路, 微功率, 2, 4 µs, 2.7V 至 15V, SOIC, 8 引脚
TI(德州仪器)
模拟比较器 A 926-LMC6762BIM/NOPB
TI(德州仪器)
具有推挽输出的双路微功耗耗轨到轨输入 CMOS 比较器 8-SOIC -40 to 85
器件 Datasheet 文档搜索
器件加载中...
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册,每天更新 5,000 多个 PDF 文件