Web Analytics
Datasheet 搜索 > 32位控制器 > NXP(恩智浦) > LPC2366FBD100 数据手册 > LPC2366FBD100 其他数据使用手册 1/139 页
LPC2366FBD100
器件3D模型
57.864
导航目录
LPC2366FBD100数据手册
Page:
of 139 Go
若手册格式错乱,请下载阅览PDF原文件
1. General description
The LPC408x/7x is an ARM Cortex-M4 based digital signal controller for embedded
applications requiring a high level of integration and low power dissipation.
The ARM Cortex-M4 is a next generation core that offers system enhancements such as
low power consumption, enhanced debug features, and a high level of support block
integration. The ARM Cortex-M4 CPU incorporates a 3-stage pipeline, uses a Harvard
architecture with separate local instruction and data buses as well as a third bus for
peripherals, and includes an internal prefetch unit that supports speculative branching.
The ARM Cortex-M4 supports single-cycle digital signal processing and SIMD
instructions. A hardware floating-point processor is integrated in the core for several
versions of the part.
The LPC408x/7x adds a specialized flash memory accelerator to accomplish optimal
performance when executing code from flash. The LPC408x/7x is targeted to operate at
up to 120 MHz CPU frequency.
The peripheral complement of the LPC408x/7x includes up to 512 kB of flash program
memory, up to 96 kB of SRAM data memory, up to 4032 byte of EEPROM data memory,
External Memory controller (EMC), LCD, Ethernet, USB Device/Host/OTG, an SPI Flash
Interface (SPIFI), a General Purpose DMA controller, five UARTs, three SSP controllers,
three I
2
C-bus interfaces, a Quadrature Encoder Interface, four general purpose timers,
two general purpose PWMs with six outputs each and one motor control PWM, an
ultra-low power RTC with separate battery supply and event recorder, a windowed
watchdog timer, a CRC calculation engine and up to 165 general purpose I/O pins.
The analog peripherals include one eight-channel 12-bit ADC, two analog comparators,
and a DAC.
The pinout of LPC408x/7x is intended to allow pin function compatibility with the
LPC24xx/23xx as well as the LPC178x/7x families.
For additional documentation, see Section 17 “
References.
2. Features and benefits
Functional replacement for LPC23xx/24xx and LPC178x/7x family devices.
ARM Cortex-M4 core:
ARM Cortex-M4 processor, running at frequencies of up to 120 MHz.
ARM Cortex-M4 built-in Memory Protection Unit (MPU) supporting eight regions.
ARM Cortex-M4 built-in Nested Vectored Interrupt Controller (NVIC).
LPC408x/7x
32-bit ARM Cortex-M4 MCU; up to 512 kB flash, 96 kB SRAM;
USB Device/Host/OTG; Ethernet; LCD; EMC; SPIFI
Rev. 3.3 — 16 October 2015 Product data sheet

LPC2366FBD100 数据手册

NXP(恩智浦)
69 页 / 0.39 MByte
NXP(恩智浦)
709 页 / 3.16 MByte
NXP(恩智浦)
139 页 / 2.7 MByte
NXP(恩智浦)
24 页 / 0.6 MByte
NXP(恩智浦)
48 页 / 1.05 MByte

LPC2366 数据手册

NXP(恩智浦)
单芯片16位/ 32位微控制器;高达512 KB的闪存, ISP / IAP ,以太网, USB 2.0 ,CAN和10位ADC / DAC Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC
NXP(恩智浦)
单芯片16位/ 32位微控制器;高达512 KB的闪存, ISP / IAP ,以太网, USB 2.0 ,CAN和10位ADC / DAC Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC
NXP(恩智浦)
NXP  LPC2366FBD100,551  微控制器, 32位, ARM7TDMI, 72 MHz, 256 KB, 32 KB, 100 引脚, LQFP
NXP(恩智浦)
单片机(MCU/MPU/SOC) LPC2366FBD100K LQFP-100(14x14)
NXP(恩智浦)
NXP(恩智浦)
Philips(飞利浦)
器件 Datasheet 文档搜索
器件加载中...
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册,每天更新 5,000 多个 PDF 文件