Datasheet 搜索 > DA转换器 > Microchip（微芯） > MCP4728-E/UN 数据手册 > MCP4728-E/UN 其他数据使用手册 1/66 页
器件3D模型￥ 9.147
MCP4728-E/UN 其他数据使用手册 - Microchip（微芯）
制造商:
Microchip（微芯）
分类:
DA转换器
封装:
MSOP-10
描述:
MICROCHIP MCP4728-E/UN 数模转换器, 四路, AEC-Q100, AEC-Q100, 12 bit, 串行, 2.7V 至 5.5V, MSOP, 10 引脚
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
引脚图在P21Hot
典型应用电路图在P51P53
原理图在P2
标记信息在P59
封装信息在P59P63
技术参数、封装参数在P4P5P6P8P9P10
应用领域在P1P51
电气规格在P4P5P6P8P9P10P23
导航目录
MCP4728-E/UN数据手册
Page:
of 66 Go
若手册格式错乱，请下载阅览PDF原文件
© 2009 Microchip Technology Inc. DS22187D-page 1
MCP4728
Features
• 12-Bit Voltage Output DAC with 4 Buffered
Outputs
• On-Board Non-Volatile Memory (EEPROM) for
DAC Codes and I
2
C
TM
Address Bits
• Internal or External Voltage Reference Selection
• Output Voltage Range:
- Using Internal V
REF
(2.048V):
0.000V to 2.048V with Gain Setting = 1
0.000V to 4.096V with Gain Setting = 2
- Using External V
REF
(V
DD
): 0.000V to V
DD
• ±0.2 LSB DNL (typical)
• Fast Settling Time: 6 µs (typical)
• Normal or Power-Down Mode
• Low Power Consumption
• Single-Supply Operation: 2.7V to 5.5V
•I
2
C Interface:
- Address bits: User Programmable to
EEPROM
- Standard (100 kbps), Fast (400 kbps) and
High Speed (3.4 Mbps) Modes
• 10-Lead MSOP Package
• Extended Temperature Range: -40°C to +125°C
Applications
• Set Point or Offset Adjustment
• Sensor Calibration
• Closed-Loop Servo Control
• Low Power Portable Instrumentation
• PC Peripherals
• Programmable Voltage and Current Source
• Industrial Process Control
• Instrumentation
• Bias Voltage Adjustment for Power Amplifiers
Description
The MCP4728 device is a quad, 12-bit voltage output
Digital-to-Analog Convertor (DAC) with non-volatile
memory (EEPROM). Its on-board precision output
amplifier allows it to achieve rail-to-rail analog output
swing.
The DAC input codes, device configuration bits, and
I
2
C address bits are programmable to the non-volatile
memory (EEPROM) by using I
2
C serial interface
commands. The non-volatile memory feature enables
the DAC device to hold the DAC input codes during
power-off time, allowing the DAC outputs to be
available immediately after power-up with the saved
settings. This feature is very useful when the DAC
device is used as a supporting device for other devices
in applications network.
The MCP4728 device has a high precision internal
voltage reference (V
REF
= 2.048V). The user can select
the internal reference or external reference (V
DD
) for
each channel individually.
Each channel can be operated in normal mode or
power-down mode individually by setting the
configuration register bits. In power-down mode, most
of the internal circuits in the powered down channel are
turned off for power-savings and the output amplifier
can be configured to present a known low, medium, or
high resistance output load.
The MCP4728 device includes a Power-On-Reset
(POR) circuit to ensure reliable power-up and an
on-board charge pump for the EEPROM programming
voltage.
The MCP4728 has a two-wire I
2
C compatible serial
interface for standard (100 kHz), fast (400 kHz), or high
speed (3.4 MHz) mode.
The MCP4728 DAC is an ideal device for applications
requiring design simplicity with high precision, and for
applications requiring the DAC device settings to be
saved during power-off time.
The MCP4728 device is available in a 10-lead MSOP
package and operates from a single 2.7V to 5.5V
supply voltage.
12-Bit, Quad Digital-to-Analog Converter with EEPROM Memory
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
