Web Analytics
Datasheet 搜索 > 8位微控制器 > Microchip(微芯) > PIC12F1612-E/P 数据手册 > PIC12F1612-E/P 产品描述及参数 1/38 页
PIC12F1612-E/P
器件3D模型
2.74
导航目录
  • 引脚图在P2
  • 技术参数、封装参数在P31
  • 电气规格在P31
PIC12F1612-E/P数据手册
Page:
of 38 Go
若手册格式错乱,请下载阅览PDF原文件
2013-2014 Microchip Technology Inc. Preliminary DS40001720C-page 1
This document includes the programming specifications for the following devices:
1.0 OVERVIEW
The devices can be programmed using either the high-voltage In-Circuit Serial Programming™ (ICSP™) method or the
low-voltage ICSP™ method.
1.1 Hardware Requirements
1.1.1 HIGH-VOLTAGE ICSP PROGRAMMING
In High-Voltage ICSP™ mode, these devices require two programmable power supplies: one for VDD and one for the
MCLR
/VPP pin.
1.1.2 LOW-VOLTAGE ICSP PROGRAMMING
In Low-Voltage ICSP™ mode, these devices can be programmed using a single VDD source in the operating range. The
MCLR
/VPP pin does not have to be brought to a different voltage, but can instead be left at the normal operating voltage.
1.1.2.1 Single-Supply ICSP Programming
The LVP bit in Configuration Word 2 enables single-supply (low-voltage) ICSP programming. The LVP bit defaults to a
1’ (enabled) from the factory. The LVP bit may only be programmed to ‘0’ by entering the High-Voltage ICSP mode,
where the MCLR/VPP pin is raised to VIHH. Once the LVP bit is programmed to a ‘0’, only the High-Voltage ICSP mode
is available and only the High-Voltage ICSP mode can be used to program the device.
PIC12F1612 PIC12LF1612
PIC16F1613 PIC16LF1613
PIC16F1614 PIC16LF1614
PIC16F1615 PIC16LF1615
PIC16F1618 PIC16LF1618
PIC16F1619 PIC16LF1619
Note 1: The High-Voltage ICSP mode is always available, regardless of the state of the LVP bit, by applying V
IHH
to the MCLR/VPP pin.
2: While in Low-Voltage ICSP mode, MCLR
is always enabled, regardless of the MCLRE bit, and the port
pin can no longer be used as a general purpose input.
PIC12(L)F1612/16(L)F161X Memory Programming Specification
PIC12(L)F1612/16(L)F161X

PIC12F1612-E/P 数据手册

Microchip(微芯)
384 页 / 5.78 MByte
Microchip(微芯)
397 页 / 3.94 MByte
Microchip(微芯)
38 页 / 0.3 MByte
Microchip(微芯)
2 页 / 0.1 MByte

PIC12F1612 数据手册

Microchip(微芯)
MICROCHIP  PIC12F1612-I/SN  微控制器, 8位, 闪存, PIC12F16xx, 32 MHz, 3.5 KB, 256 Byte, 8 引脚, SOIC
Microchip(微芯)
PIC12F1612 8 位闪存微控制器Microchip 的 PIC12 微控制器 (MCU) 是世界首个 8 引脚微控制器。 最初已经作为一次可编程 (OTP) 部件推出,此系列设备继续扩展为额外功能且添加了附加改进功能。 PIC12F1612 系列微控制器基于 Microchip 具有深硬件堆栈和 49 个说明的增强型中级芯。 这些 MCU 提供高达 8 MIPS、高达 3.5 K 字节程序内存和高达 256 字节数据内存。 板载可配置 RC 振荡器,精确度为 ±1%。### 特点49 个指令 16 级硬件堆栈 16 MHz 内部振荡器 – Selectable Output Range from 16 MHz to 31 kHz 6 个输入/输出引脚 1 个比较器 4 通道 10 位模拟至数字转换器 (ADC) 一个 8 位计时器 一个 16 位计时器 2 个捕获、比较 PWM 模块 2 个信号测量计时器 零交叉检测 (ZCD) 模块 补充波形发生器 (CWG) 在线串行编程 (ICSP) 超低功耗 (XLP) 技术 ### PIC12F 微控制器### Microchip PIC12F 8 位 PIC® 微控制器Microchip 的 PIC12F 微控制器 (MCU) 是世界首个 8 引脚微控制器。 最初已经作为一次可编程 (OTP) 部件推出,此系列的设备将继续扩展为 Microchip 添加额外功能,进一步提高规格,并继续提供比以前更大的值。 PIC12F 成功的关键是在一个 8 引脚封装中允许六个输入/输出通道的内部 RC 振荡器。 此 RC 振荡器的更高版本可在 31kHz 和 32MHz 之间配置。
Microchip(微芯)
Microchip(微芯)
PIC 32MHz 闪存:2K@x14bit
Microchip(微芯)
PIC 32MHz 闪存:2K@x14bit
Microchip(微芯)
Microchip(微芯)
8位微控制器 -MCU 8Bit MCU 3.5KB Flash 256 RAM, 32MHz Osc.
Microchip(微芯)
器件 Datasheet 文档搜索
器件加载中...
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册,每天更新 5,000 多个 PDF 文件