Datasheet 搜索 > 8位微控制器 > Microchip（微芯） > PIC16C57C-20/SP 数据手册 > PIC16C57C-20/SP 产品描述及参数 6/18 页
器件3D模型￥ 1.035
PIC16C57C-20/SP 产品描述及参数 - Microchip（微芯）
制造商:
Microchip（微芯）
分类:
8位微控制器
封装:
SPDIP-28
描述:
MICROCHIP PIC16C57C-20/SP 微控制器, 8位, PIC16C5xx, 40 MHz, 3 KB, 72 Byte, 28 引脚, NDIP
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
应用领域在P3
导航目录
PIC16C57C-20/SP数据手册
Page:
of 18 Go
若手册格式错乱，请下载阅览PDF原文件
MPLAB
®
ICE 2000
DS51140N-page 6 © 2007 Microchip Technology Inc.
5.4.3 DVA14XP280
5.4.4 DVA16XP140
This device adapter is intended for use with the PIC14000
28-pin DIP device. It has two mechanical switches that
allow target pins OSC1 and OSC2 to be routed to the
emulator silicon on the PCM14XA0 processor module or
the oscillator device on the device adapter, as shown in
Table 5-3.
TABLE 5-3: DVA14XP280 DEVICE ADAPTER SWITCH ASSIGNMENT
Desired Function Switch Position
IN Mode Set S1 to OSC2INT
Set S2 to OSC1INT
HS Mode Set S1 to OSC2EXT
Set S2 to OSC1EXT
This device adapter is intended for use with the PIC16C505
14-pin DIP device. It has four mechanical switches. Two of
the switches allow target pins RB4 and RB5 to be routed to
the emulator silicon on the PCM16XA0 processor module or
the oscillator device on the device adapter. The other two
switches control the routing of RB3 and RC5 signals. RB3
can be a general purpose input or MCLR
. RC5 can be a
general purpose I/O or can drive the TOCKI input, as shown
in Table 5-4.
TABLE 5-4: DVA16XP140 DEVICE ADAPTER SWITCH ASSIGNMENT
Desired Function Switch Positions
RC5 Set S4 to RC5
RB3 Set S3 to RB3
RB4 Set S2 to RB4
RB5 Set S1 to RB5
MCLR
Set S3 to MCLR
External Oscillator Input Set S1 to OSC1 and
set S2 to OSC2
TIMER0 Clock Input Set S4 to T0CKI
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
