Datasheet 搜索 > 8位微控制器 > Microchip（微芯） > PIC16F1718-I/SP 数据手册 > PIC16F1718-I/SP 其他数据使用手册 1/483 页
器件3D模型￥ 15.221
PIC16F1718-I/SP 其他数据使用手册 - Microchip（微芯）
制造商:
Microchip（微芯）
分类:
8位微控制器
封装:
SDIP-28
描述:
MICROCHIP PIC16F1718-I/SP 微控制器, 8位, 闪存, PIC16F18xx, 32 MHz, 28 KB, 2 KB, 28 引脚, SDIP
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
引脚图在P3P15P16P17P18P19P20P21P156P178P287P289Hot
典型应用电路图在P166P382
原理图在P13P14P22P60P69P81P102P150P157P164P169P171
封装尺寸在P461
标记信息在P458P459P460
封装信息在P73P458P462P463P464P466P467P468P474P475P476P478
技术参数、封装参数在P72P76P79P89P100P101P171P172P258P261P408P413
应用领域在P58
电气规格在P76P79P89P100P101
导航目录
PIC16F1718-I/SP数据手册
Page:
of 483 Go
若手册格式错乱，请下载阅览PDF原文件
2014-2015 Microchip Technology Inc. DS40001740B-page 1
PIC16(L)F1717/8/9
Description:
PIC16(L)F1717/8/9 microcontrollers combine Intelligent Analog integration with low cost and extreme low power (XLP)
to suit a variety of general purpose applications. These 28-pin and 40-pin devices deliver on-chip op amps, Core
Independent Peripherals (CLC, NCO and COG), Peripheral Pin Select and Zero-Cross Detect, providing for increased
design flexibility.
Core Features:
• C Compiler Optimized RISC Architecture
• Only 49 Instructions
• Operating Speed:
- 0-32 MHz clock input
- 125 ns minimum instruction cycle
• Interrupt Capability
• 16-Level Deep Hardware Stack
• Up to Four 8-Bit Timers
• One 16-Bit Timer
• Power-on Reset (POR)
• Power-up Timer (PWRT)
• Low-Power Brown-out Reset (LPBOR)
• Programmable Watchdog Timer (WDT) up to
256s
• Programmable Code Protection
Memory:
• Up to 16 Kwords Flash Program Memory
• Up to 2048 Bytes Data SRAM Memory
• Direct, Indirect and Relative Addressing modes
• High-Endurance Flash (HEF):
- 128B of nonvolatile data storage
- 100K Erase/Write cycles
Operating Characteristics:
• Operating Voltage Range:
- 1.8V to 3.6V (PIC16LF1717/8/9)
- 2.3V to 5.5V (PIC16F1717/8/9)
• Temperature Range:
- Industrial: -40°C to 85°C
- Extended: -40°C to 125°C
eXtreme Low-Power (XLP) Features:
• Sleep mode: 50 nA @ 1.8V, typical
• Watchdog Timer: 500 nA @ 1.8V, typical
• Secondary Oscillator: 500 nA @ 32 kHz
• Operating Current:
- 8 uA @ 32 kHz, 1.8V, typical
- 32 uA/MHz @ 1.8V, typical
Digital Peripherals:
• Configurable Logic Cell (CLC):
- Integrated combinational and sequential logic
• Complementary Output Generator (COG):
- Rising/falling edge dead-band control/
blanking
• Numerically Controlled Oscillator (NCO):
- Generates true linear frequency control and
increased frequency resolution
- Input Clock: 0 Hz < F
NCO < 32 MHz
- Resolution: F
NCO/220
• Capture/Compare/PWM (CCP) module
• PWM: Two 10-Bit Pulse-Width Modulators
• Serial Communications:
- SPI, I
2
C, RS-232, RS-485, LIN compatible
- Auto-Baud Detect, auto-wake-up on start
• Up to 35 I/O Pins and One Input Pin:
- Individually programmable pull-ups
- Slew rate control
- Interrupt-on-Change with edge-select
• Peripheral Pin Select (PPS):
- Enables pin mapping of digital I/O
Intelligent Analog Peripherals:
• Operational Amplifiers:
- Two configurable rail-to-rail op amps
- Selectable internal and external channels
- 2 MHz gain bandwidth product
• High-Speed Comparators:
- Up to two comparators
- 50 ns response time
- Rail-to-rail inputs
• 10-Bit Analog-to-Digital Converter (ADC):
- Up to 28 external channels
- Conversion available during Sleep
- Temperature indicator
• Zero-Cross Detector (ZCD):
- Detect when AC signal on pin crosses
ground
• 8-Bit Digital-to-Analog Converter (DAC):
- Output available externally
- Internal connections to comparators, op
amps, Fixed Voltage Reference (FVR) and
ADC
• Internal Voltage Reference module
Cost-Effective 8-Bit Intelligent Analog Flash Microcontrollers
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
