Datasheet 搜索 > 微控制器 > Microchip（微芯） > PIC16F1946T-I/MR 数据手册 > PIC16F1946T-I/MR 其他数据使用手册 6/13 页
器件3D模型￥ 5.694
PIC16F1946T-I/MR 其他数据使用手册 - Microchip（微芯）
制造商:
Microchip（微芯）
分类:
微控制器
封装:
QFN-64
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
PIC16F1946T-I/MR数据手册
Page:
of 13 Go
若手册格式错乱，请下载阅览PDF原文件
PIC16(L)F1946/1947
DS80000497G-page 6 2010-2014 Microchip Technology Inc.
Method 4: Use the software-enabled BOR
as described in Method 3, but use
the following sequence:
a) Switch to internal 32 kHz oscil-
lator immediately before Sleep;
b) Upon wake-up, turn on FVR
(FVREN bit of the FVRCON
register);
c) Manually turn on the BOR;
d) Switch the clock back to the
preferred clock source.
Affected Silicon Revisions
4. Module: Enhanced Capture Compare
PWM (ECCP)
4.1 Enhanced PWM
When the PWM is configured for Full-Bridge mode
and the duty cycle is set to 0%, writing the
PxM<1:0> bits to change the direction has no
effect on PxA and PxC outputs.
Work around
Increase the duty cycle to a value greater than 0%
before changing directions.
Affected Silicon Revisions
4.2 Enhanced PWM
In PWM mode, when the duty cycle is set to 0%
and the STRxSYNC bit is set, writing the STRxA,
STRxB, STRxC and the STRxD bits to enable/
disable steering to port pins has no effect on the
outputs.
Work around
Increase the duty cycle to a value greater than 0%
before enabling/disabling steering to port pins.
Affected Silicon Revisions
Note: When using the software BOR, follow the
steps in Methods 3 or 4 above when
enabling BOR for the first time during
program execution.
A2 A3 A4 A5 A6
XXXX
A2 A3 A4 A5 A6
X
A2 A3 A4 A5 A6
X
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
