Datasheet 搜索 > TI（德州仪器） > SN6505BEVM 数据手册 > SN6505BEVM 其他数据使用手册 1/21 页
￥ 458.863
SN6505BEVM 其他数据使用手册 - TI（德州仪器）
制造商:
TI（德州仪器）
封装:
-
描述:
开发板 SN6505BEVM -
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
导航目录
SN6505BEVM数据手册
Page:
of 21 Go
若手册格式错乱，请下载阅览PDF原文件
2011 Microchip Technology Inc. DS22281A-page 1
Features
• 180° Sinusoidal Drive, for high efficiency and low
acoustic noise
• Position Sensorless BLDC Drivers
(No Hall-effect sensor required)
• Integrated Power Transistors
• Supports 2V to 5.5V Power Supplies
• Programming Resistor (R
PROG
) setting to fit motor
constant (Km) range from 3.25 mV/Hz to
52 mV/Hz
• Direction Control:
- Forward direction: connect DIR pin to GND or
leave floating
- Reverse direction: connect DIR pin to V
BIAS
or 3V
• Speed Control through Power Supply Modulation
(PSM) and/or Pulse-Width Modulation (PWM)
• Built-in Frequency Generator (FG Output Signal)
• Built-in Lockup Protection and Automatic
Recovery Circuit
• Built-in Overcurrent Limitation
• Built-in Thermal Shutdown Protection
• Built-in Over Voltage Protection
• No External Tuning Required
• Available Package
10-Lead 3mm x 3mm UDFN
Applications
• Notebook CPU Cooling Fans
• 5V 3-Phase BLDC Motors
Description
The MTD6505 device is a 3-phase full-wave
sensorless driver for brushless DC (BLDC) motors. It
features 180° sinusoidal drive, high torque output and
silent drive. With the adaptive features, parameters and
wide range of power supplies (2V to 5.5V), the
MTD6505 is intended to cover a broad range of motor
characteristics, while requiring minimum external
components. Speed control can be achieved through
either power supply modulation (PSM) or pulse-width
modulation (PWM).
The compact packaging and the minimal bill-of-
material make the MTD6505 device extremely cost
efficient in fan applications. For example, the CPU
cooling fans in notebook computers require designs
that provide low acoustic noise, low mechanical
vibration, and are highly efficient. The frequency
generator (FG) output enables precision speed control
in closed-loop applications.
The MTD6505 device includes Lockup Protection
mode to turn off the output current when the motor is in
a lock condition, with an automatic recovery feature to
restart the fan when the lock condition is removed.
Motor overcurrent limitation and thermal shutdown
protection are included for safety enhanced operations.
The MTD6505 is available in a compact, thermally
enhanced, 3mm x 3mm 10-lead UDFN package.
Package Types
MTD6505
3x3 UDFN*
V
BIAS
R
PROG
OUT2
FG PWM
DIR
V
DD
GND
1
2
3
5
10
9
8
6
OUT1 OUT3
4
7
EP
11
*Includes Exposed Thermal Pad (EP); see Table 3-1 .
Sinusoidal Sensorless 3-Phase Brushless DC Fan Motor Driver
MTD6505
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
