Datasheet 搜索 > 开发套件 > Microchip（微芯） > MCP3901EV-MCU16 数据手册 > MCP3901EV-MCU16 产品设计参考手册 5/38 页
器件3D模型￥ 1103.006
MCP3901EV-MCU16 产品设计参考手册 - Microchip（微芯）
制造商:
Microchip（微芯）
分类:
开发套件
封装:
SSOP
描述:
MCP3901 双路 ADC 评估板此评估板用于 16 位 MCU 系统，可评估 MCP3901 24 位双通道 ADC 的性能。 它还提供用于基于 16 位 PIC 应用的开发平台，使用现有 100 引脚 PIM 模块。编程的 dsPIC33FJ256GP710 PIM 模块，可与 LabView GUI 进行通信，用于数据数据交换和 ADC 设置 使用串行至 PC 的连接进行双路 24 位 ADC MCP3901 输出显示 USB 连接，用于更高的速度采样和数据收集 90dB SINAD 时同步 4ksps 且双通道上最高速度 55ksps 性能 通过图形 PC 工具进行系统和 ADC 性能分析，显示噪声矩形图、频率域 (FFT)、时间域示波器图表和统计数字分析 坚固的硬件设计，带模拟接地和模拟/数字分离，用于噪声性能评估 单独的电源和电源层：4 层印刷电路板 PICtail™ Plus 连接器，用于 Explorer-16 子板兼容性 ### 注需要 RS-232 电缆或 USB 到 RS-232 适配器电缆。### 模数转换器 - Microchip
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
原理图在P13P25P26P27P28P29P30P31P33
导航目录
MCP3901EV-MCU16数据手册
Page:
of 38 Go
若手册格式错乱，请下载阅览PDF原文件
MCP3901 ADC EVALUATION BOARD
FOR 16-BIT MCUs USER’S GUIDE
2010 Microchip Technology Inc. DS51845B-page 5
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
MCP3901 ADC Evaluation Board for 16-Bit MCUs. Items discussed in this chapter
include:
• Document Layout
• Conventions Used in this Guide
• Recommended Reading
• The Microchip Web Site
• Customer Support
• Document Revision History
DOCUMENT LAYOUT
This document describes how to use the MCP3901 ADC Evaluation Board for 16-Bit
MCUs as a development tool to emulate and debug firmware on a target board. The
manual layout is as follows:
• Chapter 1. “Hardware Description”– Provides important information about the
MCP3901 ADC Evaluation Board for 16-Bit MCUs hardware.
• Chapter 2. “Firmware”– Describes the MCP3901 ADC Evaluation Board for
16-Bit MCUs firmware.
• Chapter 3. “MCP3901 PC Software Tool” – Provides detailed information about
board’s PC software tool.
• Appendix A. “Schematics and Layouts”– Shows the schematic and board
layouts for the MCP3901 ADC Evaluation Board for 16-Bit MCUs.
• Appendix B. “Bill Of Materials (BOM)” – Lists the parts used to build the
MCP3901 ADC Evaluation Board for 16-Bit MCUs.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE on-line help.
Select the Help menu, and then Topics to open a list of available on-line help files.
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
