Datasheet 搜索 > 多工器 > NXP（恩智浦） > PCA9546AD 数据手册 > PCA9546AD 产品设计参考手册 3/64 页
器件3D模型￥ 7.132
PCA9546AD 产品设计参考手册 - NXP（恩智浦）
制造商:
NXP（恩智浦）
分类:
多工器
封装:
SOIC-16
描述:
NXP PCA9546AD 芯片, 开关, 4通道, I2C, 16SOIC
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
应用领域在P62
电气规格在P46
导航目录
PCA9546AD数据手册
Page:
of 64 Go
若手册格式错乱，请下载阅览PDF原文件
UM10204 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
User manual Rev. 6 — 4 April 2014 3 of 64
NXP Semiconductors
UM10204
I
2
C-bus specification and user manual
1. Introduction
The I
2
C-bus is a de facto world standard that is now implemented in over 1000 different
ICs manufactured by more than 50 companies. Additionally, the versatile I
2
C-bus is used
in various control architectures such as System Management Bus (SMBus), Power
Management Bus (PMBus), Intelligent Platform Management Interface (IPMI), Display
Data Channel (DDC) and Advanced Telecom Computing Architecture (ATCA).
This document assists device and system designers to understand how the I
2
C-bus works
and implement a working application. Various operating modes are described. It contains
a comprehensive introduction to the I
2
C-bus data transfer, handshaking and bus
arbitration schemes. Detailed sections cover the timing and electrical specifications for the
I
2
C-bus in each of its operating modes.
Designers of I
2
C-compatible chips should use this document as a reference and ensure
that new devices meet all limits specified in this document. Designers of systems that
include I
2
C devices should review this document and also refer to individual component
data sheets.
2. I
2
C-bus features
In consumer electronics, telecommunications and industrial electronics, there are often
many similarities between seemingly unrelated designs. For example, nearly every
system includes:
• Some intelligent control, usually a single-chip microcontroller
• General-purpose circuits like LCD and LED drivers, remote I/O ports, RAM,
EEPROM, real-time clocks or A/D and D/A converters
• Application-oriented circuits such as digital tuning and signal processing circuits for
radio and video systems, temperature sensors, and smart cards
To exploit these similarities to the benefit of both systems designers and equipment
manufacturers, as well as to maximize hardware efficiency and circuit simplicity, Philips
Semiconductors (now NXP Semiconductors) developed a simple bidirectional 2-wire bus
for efficient inter-IC control. This bus is called the Inter IC or I
2
C-bus. All I
2
C-bus
compatible devices incorporate an on-chip interface which allows them to communicate
directly with each other via the I
2
C-bus. This design concept solves the many interfacing
problems encountered when designing digital control circuits.
Here are some of the features of the I
2
C-bus:
• Only two bus lines are required; a serial data line (SDA) and a serial clock line (SCL).
• Each device connected to the bus is software addressable by a unique address and
simple master/slave relationships exist at all times; masters can operate as
master-transmitters or as master-receivers.
• It is a true multi-master bus including collision detection and arbitration to prevent data
corruption if two or more masters simultaneously initiate data transfer.
• Serial, 8-bit oriented, bidirectional data transfers can be made at up to 100 kbit/s in
the Standard-mode, up to 400 kbit/s in the Fast-mode, up to 1 Mbit/s in Fast-mode
Plus, or up to 3.4 Mbit/s in the High-speed mode.
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
