Datasheet 搜索 > 微控制器 > Microchip（微芯） > PIC18F1320-I/SO 数据手册 > PIC18F1320-I/SO 产品设计参考手册 5/84 页
器件3D模型￥ 32.603
PIC18F1320-I/SO 产品设计参考手册 - Microchip（微芯）
制造商:
Microchip（微芯）
分类:
微控制器
封装:
SOIC-18
描述:
PIC18F1220/1320 8 位微控制器### PIC18 微控制器
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
封装尺寸在P71
技术参数、封装参数在P6P71
导航目录
PIC18F1320-I/SO数据手册
Page:
of 84 Go
若手册格式错乱，请下载阅览PDF原文件
MPLAB
®
PICSTART
®
PLUS
USER’S GUIDE
2004 Microchip Technology Inc. DS51028F-page 1
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
PICSTART Plus device programmer. Items discussed in this chapter include:
• About This Guide
• Warranty Registration
• Recommended Reading
• The Microchip Web Site
• Development Systems Customer Change Notification Service
• Customer Support
ABOUT THIS GUIDE
Document Layout
This document describes how to use PICSTART Plus as a development tool to
program firmware to a target device. The manual layout is as follows:
• Chapter 1: PICSTART Plus Overview – Describes the PICSTART Plus and how
it works.
• Chapter 2: PICSTART Plus Installation – How to install PICSTART Plus
hardware and MPLAB software.
• Chapter 3: Tutorial – Contains tutorials for programming calibration memory
devices, memory devices and other PICmicro MCU devices.
• Chapter 4: Using the PICSTART Plus – How to use PICSTART Plus to program
devices.
• Chapter 5: PICSTART Plus – MPLAB IDE Reference – PICSTART Plus options
available through the PICSTART Plus menu and Options menu.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools
and documentation are constantly evolving to meet customer needs, so some actual
dialogs and/or tool descriptions may differ from those in this document. Please refer
to our web site (www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom
of each page, in front of the page number. The numbering convention for the DS
number is “DSXXXXXA”, where “XXXXX” is the document number and “A” is the
revision level of the document.
For the most up-to-date information on development tools, see the MPLAB IDE
on-line help. Select the Help menu, and then Topics to open a list of available on-line
help files.
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
