Web Analytics
Datasheet 搜索 > 微控制器 > ST Microelectronics(意法半导体) > STM32F100VDT6BTR 数据手册 > STM32F100VDT6BTR 产品设计参考手册 1/30 页
STM32F100VDT6BTR
器件3D模型
20.041
导航目录
  • 应用领域在P30
STM32F100VDT6BTR数据手册
Page:
of 30 Go
若手册格式错乱,请下载阅览PDF原文件
October 2010 Doc ID 16211 Rev 2 1/30
PM0063
Programming manual
STM32F100xx
value line Flash programming
Introduction
This programming manual describes how to program the Flash memory of low-density
(STM32F100x4, STM32F100x6), medium-density STM32F100xx (STM32F100x8,
STM32F100xB) and high-density (STM32F100xC, STM32F100xD, STM32F100xE)
microcontrollers. For convenience, these will be referred to as STM32F100xx in the rest of
this document unless otherwise specified.
The STM32F100xx embedded Flash memory can be programmed using in-circuit
programming or in-application programming.
The in-circuit programming (ICP) method is used to update the entire contents of the
Flash memory, using the JTAG, SWD protocol or the boot loader to load the user application
into the microcontroller. ICP offers quick and efficient design iterations and eliminates
unnecessary package handling or socketing of devices.
In contrast to the ICP method, in-application programming (IAP) can use any
communication interface supported by the microcontroller (I/Os, UART, I
2
C, SPI, etc.) to
download programming data into memory. IAP allows the user to re-program the Flash
memory while the application is running. Nevertheless, part of the application has to have
been previously programmed in the Flash memory using ICP.
The Flash interface implements instruction access and data access based on the AHB
protocol. It implements the logic necessary to carry out Flash memory operations
(Program/Erase). Program/Erase operations can be performed over the whole product
voltage range. Read/Write protections and option bytes are also implemented.
www.st.com

STM32F100VDT6BTR 数据手册

ST Microelectronics(意法半导体)
106 页 / 1.91 MByte
ST Microelectronics(意法半导体)
30 页 / 0.35 MByte
ST Microelectronics(意法半导体)
34 页 / 0.57 MByte
ST Microelectronics(意法半导体)
6 页 / 0.09 MByte

STM32F100VDT6 数据手册

ST Microelectronics(意法半导体)
单片机(MCU/MPU/SOC) STM32F100VDT6 LQFP-100(14x14)
ST Microelectronics(意法半导体)
STM32F100 超值系列微处理器,STMicroelectronicsSTM32F100 超值型基于 ARM Cortex™ M3 MCU,包含带电动机控制和 CEC 功能的 24 MHz CPU。 STM32 系列 ARM Cortex-M3 32 位闪存微控制器产品系列在低功率、低电压情况下运行,结合了带有实时功能的高性能。 它们为引脚到引脚接线并兼容软件。 STMicroelectronics 高级 ARM 32 位处理器低密度和中密度超值型带高达 512 KB 的闪存、计时器、ADC、DAC 和通信接口,还提供不同的封装。 ST 的 STM32F100 微控制器系列适用于多种区域,例如应用控制和用户接口;医疗和手持设备;PC 和游戏外设;GPS 平台和工业应用。 32 位 RISC;高达 512 KB 闪存;高达 32 KB SRAM 温度范围:- 40 至 +85 °C 低电压:2 V 至 3.6 V ### STM32F1 系列 32 位 ARM® Cortex®-M3 微控制器,STMicroelectronics32 位闪存微控制器的 STM32 系列基于 ARM Cortex™ M3 核心的突破 - 为嵌入式应用特别开发的核心。 STM32 系列得益于 Cortex-M3 体系结构增强功能,包括为传达改进性能而设置的 Thumb-2 指令,带更好的编码密度,对中断更快的反应,所有的均和领先的工业功耗相接合。出色的实时表现 卓越功效 卓越的和新型的外围设备 最大程度的集成 跨族引脚,外围设备和软件兼容性
ST Microelectronics(意法半导体)
STM32 系列 32 位 384 kB 闪存 32 kB RAM 基于 ARM 微控制器 - LQFP-100
器件 Datasheet 文档搜索
器件加载中...
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册,每天更新 5,000 多个 PDF 文件