Datasheet 搜索 > 开发套件 > FTDI Chip（飞特帝亚） > FT4232H MINI MODULE 数据手册 > FT4232H MINI MODULE 用户编程技术手册 5/21 页
￥ 232.546
FT4232H MINI MODULE 用户编程技术手册 - FTDI Chip（飞特帝亚）
制造商:
FTDI Chip（飞特帝亚）
分类:
开发套件
描述:
USB 2.0 高速微型模块，FTDI ChipFT2232H 微型模块是一个 USB 到串行/FIFO 的装置，利用了 FT2232H USB 高速双端口桥接芯片 FT4232H 微型模块是一个 USB 到串行/MPSSE 的装置，利用了 FT4232H USB 高速四端口桥接芯片 IC 处理所有 USB 信号和协议 特别适用于开发以快速验证将 USB 添加至目标设计的功能 ### 串行输入/输出外设
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
引脚图在P5Hot
导航目录
FT4232H MINI MODULE数据手册
Page:
of 21 Go
若手册格式错乱，请下载阅览PDF原文件
Copyright © 2008 Future Technology Devices International Limited 4
Document Reference No.: FT_000078
FTDI Device EEPROM Programming Using a Vinculum VNC1L Application Note AN_105
Version 1.00
Clearance No.:
FTDI# 59
2 Project Setup
2.1 Hardware Setup
The hardware required in this application is an FTDI VDIP1 development module and an FTDI TTL-232R-
3V3 cable. The VDIP1 module contains a VNC1L. A PC is used to communicate with the VNC1L on the
VDIP1 via the TTL-232-3V3 cable. The cable connects to the USB port of a PC and converts USB
signalling to a serial UART interface (at TTL levels). The serial UART signals connect to the VDIP1 module
via a six way header. The pin out for the six way header is described in Table 2.1 and Figure 2.1. The
monitor port of the VDIP1 must be configured in UART mode by setting the jumper links J3 and J4 on the
VDIP1 module as shown in Figure 2.1.
Figure 2.1 Jumper Configuration and TTL-232R-3V3 Connection on VDIP1
TTL Cable Header
Pin Number
TTL Cable
Header Pin Name
VDIP1 Pin Name VDIP1 Pin Number
Pin 1 (Black)
GND <-> GND Pin 7
Pin 2 (Brown)
CTS# <-> ADBUS2 (RTS#) Pin 9
Pin 3 (Red)
VCC <-> 5V Pin 1
Pin 4 (Orange)
TXD <-> ADBUS1 (RXD) Pin 8
Pin 5 (Yellow)
RXD <-> ADBUS0 (TXD) Pin 6
Pin 6 (Green)
RTS# <-> ADBUS3 (CTS#) Pin 10
Table 2.1 Pin Connections Between VDIP1 and TTL-232R-3V3
An alternative setup would be to attach a MCU or FPGA to the monitor port of the VDIP1 instead of the PC
and TTL-232R-3V3 cable.
To program the EEPROM of an FTxxx peripheral device, connect the USB socket of the FTxxx device into
the USB host port on the VDIP1 and then run the C application on the PC.
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
