Datasheet 搜索 > 8位微控制器 > Microchip（微芯） > PIC16C54C-20/SO 数据手册 > PIC16C54C-20/SO 用户编程技术手册 6/16 页
器件3D模型￥ 6.299
PIC16C54C-20/SO 用户编程技术手册 - Microchip（微芯）
制造商:
Microchip（微芯）
分类:
8位微控制器
封装:
SOIC-18
描述:
PIC16 系列 25 B RAM 512 x 12位 EPROM 8位 CMOS 微控制器 - SOIC-18
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
引脚图在P1Hot
电气规格在P13
导航目录
PIC16C54C-20/SO数据手册
Page:
of 16 Go
若手册格式错乱，请下载阅览PDF原文件
PIC16C5XX
DS30190H-page 6 1999 Microchip Technology Inc.
2.0 CONFIGURATION WORD
The configuration word is the very first memory location
which is accessed after entering the program/verify
mode of the PIC16C5X. It contains the two bits for the
selection of the oscillator type, the watchdog timer
enable bit, and the code protection bit. All other bits (4
through 11) are read as ’1’s.
One-Time-Programmable (OTP) devices may have the
oscillator configuration bits “FOSC0” and “FOSC1” set
by the factory and are tested accordingly. Therefore, it
is essential that the inputs RA0 and RA1 are held at '1's
when programming the “WDTE” and/or the “CP” bit of
the configuration word. Otherwise, the factory tested
and selected oscillator configuration could be overwrit-
ten and the functionality of the device is not guaranteed
any more.
FIGURE 2-1: CONFIGURATION WORD FOR PIC16CR54A/C54B/CR54B/C54C/CR54C/C55A/C56A/
CR56A/C57C/CR57B/CR57C/C58B/CR58A/CR58B
FIGURE 2-2: CONFIGURATION WORD FOR PIC16C52/C54/C54A/C55/C56/C57/C58A
CP CP CP CP CP CP CP CP CP WDTE FOSC1 FOSC0 Register: CONFIG
Address: FFFh
bit1110987654321bit0
bit 11-3: CP: Code protection bits
1 = Code protection off
0 = Code protection on
bit 2: WDTE: Watchdog timer enable bit
1 = WDT enabled
0 = WDT disabled
bit 1-0: FOSC1:FOSC0: Oscillator selection bits
11 = RC oscillator
10 = HS oscillator
01 = XT oscillator
00 = LP oscillator
— — — — — — — — CP WDTE FOSC1 FOSC0 Register: CONFIG
Address: FFFh
bit1110987654321bit0
bit 11-4: Unimplemented: Read as ’0’
bit 3: CP: Code protection bit.
1 = Code protection off
0 = Code protection on
bit 2: WDTE: Watchdog timer enable bit
(not implemented on PIC16C52)
1 = WDT enabled
0 = WDT disabled
bit 1-0: FOSC1:FOSC0: Oscillator selection bits
(2)
11 = RC oscillator
10 = HS oscillator
01 = XT oscillator
00 = LP oscillator
Note: PIC16C52 supports XT and RC oscillator only.
PIC16LV54A supports XT, RC and LP oscillator only.
PIC16LV58A supports XT, RC and LP oscillator only.
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
