Web Analytics
Datasheet 搜索 > 微控制器 > Microchip(微芯) > PIC16F628-20I/SO 数据手册 > PIC16F628-20I/SO 用户编程技术手册 3/22 页
PIC16F628-20I/SO
器件3D模型
30.147
导航目录
  • 引脚图在P2
PIC16F628-20I/SO数据手册
Page:
of 22 Go
若手册格式错乱,请下载阅览PDF原文件
2002 Microchip Technology Inc. Preliminary DS30034D-page 3
PIC16F62X
2.0 PROGRAM DETAILS
2.1 User Program Memory Map
The user memory space extends from 0x0000 to
0x1FFF. In Programming mode, the program memory
space extends from 0x0000 to 0x3FFF, with the first
half (0x0000-0x1FFF) being user program memory and
the second half (0x2000-0x3FFF) being configuration
memory. The PC will increment from 0x0000 to 0x1FFF
and wrap to 0x000, 0x2000 to 0x3FFF and wrap
around to 0x2000 (not to 0x0000). Once in configura-
tion memory, the highest bit of the PC stays a ‘1’, thus
always pointing to the configuration memory. The only
way to point to user program memory is to reset the
part and re-enter Program/Verify mode as described in
Section 2.3.
In the configuration memory space, 0x2000-0x200F
are physically implemented. However, only locations
0x2000 through 0x2007 are available. Other locations
are reserved. Locations beyond 0x200F will physically
access user memory (See Figure 2-1).
2.2 User ID Locations
A User may store identification information (ID) in four
User ID locations. The User ID locations are mapped in
[0x2000 : 0x2003]. These locations read out normally,
even after the code protection is enabled.
FIGURE 2-1: PROGRAM MEMORY MAPPING
Note 1: All other locations in PICmicro
®
MCU
configuration memory are reserved and
should not be programmed.
2: Only the low order 4 bits of the User ID
locations may be included in the device
checksum. See Section 3.1 for checksum
calculation details.
1FFF
2000
ID Location
ID Location
ID Location
ID Location
Reserved
Reserved
Device ID
Configuration Word
2000
2008
3FFF
0x3FF
Not Implemented
Implemented
1 KW
Implemented
2 KW
Implemented
0x07FF
2001
2002
2003
2004
2005
2006
2007
Implemented

PIC16F628-20I/SO 数据手册

Microchip(微芯)
171 页 / 2.68 MByte
Microchip(微芯)
688 页 / 2.66 MByte
Microchip(微芯)
22 页 / 0.25 MByte
Microchip(微芯)
170 页 / 3.83 MByte
Microchip(微芯)
24 页 / 0.47 MByte
Microchip(微芯)
18 页 / 0.58 MByte
Microchip(微芯)
2 页 / 0.1 MByte
Microchip(微芯)
4 页 / 0.15 MByte

PIC16F62820 数据手册

Microchip(微芯)
Microchip(微芯)
PIC16F627/628 8 位闪存微控制器Microchip 的 PIC16F 系列微控制器 8 位 MCU,将 Microchip 的 PIC® 体系架构融入到引脚和封装选件中,从节省空间的 14 引脚设备到功能丰富的 64 引脚设备。 带有基线、中级或增强型中级体系架构的设备提供多种不同的外围设备组合,可谓设计人员提供灵活性,并为应用提供选择。 PIC16F627/628 系列微控制器基于 Microchip 的中级内核,带 8 层深硬件堆栈和 35 个指令。 这些 MCU 提供高达 5 MIPS、高达 3.5 K 字节的程序内存,224 字节 RAM 和多达 128 字节的数据 EEPROM。### 微控制器功能最大 20 MHz CPU 速度 35 指令 8 级硬件堆栈 16 个输入/输出引脚 通电重置 (POR) 通电计时器 (PWRT) 振荡器启动计时器 (OST) 掉电重置 (BOR) 监控器计时器 (WDT) 在线串行编程 (ICSP) ### 外设两个比较器 捕获/比较/PWM 模块 两个 8 位计时器 一个 16 位计时器 通用同步接收器发送器 (USART) ### PIC16 微控制器
Microchip(微芯)
MICROCHIP  PIC16F628-20I/SO  微控制器, 8位, 闪存, PIC16F, 20 MHz, 3.5 KB, 224 Byte, 18 引脚, SOIC
Microchip(微芯)
MICROCHIP  PIC16F628-20/P  微控制器, 8位, 闪存, PIC16F, 20 MHz, 3.5 KB, 224 Byte, 18 引脚, DIP
Microchip(微芯)
MICROCHIP  PIC16F628-20I/P  微控制器, 8位, 闪存, PIC16F, 20 MHz, 3.5 KB, 224 Byte, 18 引脚, DIP
Microchip(微芯)
MICROCHIP  PIC16F628-20I/SS  微控制器, 8位, 闪存, PIC16F, 20 MHz, 3.5 KB, 224 Byte, 20 引脚, SSOP
Microchip(微芯)
MICROCHIP  PIC16F628-20/SS  芯片, 微控制器, 8位, PIC16F, 20MHZ, SSOP-20
Microchip(微芯)
基于闪存的8位CMOS微控制器 FLASH-Based 8-Bit CMOS Microcontrollers
Microchip(微芯)
基于闪存的8位CMOS微控制器 FLASH-Based 8-Bit CMOS Microcontrollers
Microchip(微芯)
基于闪存的8位CMOS微控制器 FLASH-Based 8-Bit CMOS Microcontrollers
器件 Datasheet 文档搜索
器件加载中...
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册,每天更新 5,000 多个 PDF 文件