Web Analytics
Datasheet 搜索 > 8位微控制器 > Microchip(微芯) > PIC16F723-I/SO 数据手册 > PIC16F723-I/SO 用户编程技术手册 1/32 页
PIC16F723-I/SO
器件3D模型
14.16
导航目录
  • 引脚图在P1
  • 技术参数、封装参数在P1P26
  • 电气规格在P1P26
PIC16F723-I/SO数据手册
Page:
of 32 Go
若手册格式错乱,请下载阅览PDF原文件
2011 Microchip Technology Inc. DS41332D-page 1
This document includes the
programming specifications for the
following devices:
1.0 OVERVIEW
The PIC16F72X and PIC16LF72X devices are
programmed using In-Circuit Serial Programming™
(ICSP™). This programming specification applies to
the PIC16F72X and PIC16LF72X devices in all
packages.
The PIC16F72X devices operate from 1.8 to 5.5 volts
and the PIC16LF72X devices operate from 1.8 to 3.6
volts. All other aspects of the PIC16F72X with regards
to the PIC16LF72X devices are identical.
1.1 Hardware Requirements
PIC16F72X and PIC16LF72X devices require one
power supply for V
DD and one for VPP. (See
Section 8.0 “Electrical Specifications” for more
details.)
1.2 Pin Utilization
Five pins are needed for ICSP™ programming. The
pins are listed in Table 1-1.
TABLE 1-1: PIN DESCRIPTIONS DURING PROGRAMMING
PIC16F722 PIC16F722A PIC16F723
PIC16F723A PIC16F724 PIC16F726
PIC16F727 PIC16LF722 PIC16LF722A
PIC16LF723 PIC16LF723A PIC16LF724
PIC16LF726 PIC16LF727
Pin Name
During Programming
Function Pin Type Pin Description
RB6 ICSPCLK I Clock Input – Schmitt Trigger Input
RB7 ICSPDAT I/O Data Input/Output – Schmitt Trigger Input
MCLR
/VPP Program/Verify mode P
(1)
Program Mode Select/Programming Power Supply
VDD VDD P Power Supply
VSS VSS P Ground
Legend: I = Input, O = Output, P = Power
Note 1: To activate the Program/Verify mode, high voltage needs to be applied to MCLR/VPP input. Since the
MCLR
/VPP is used to provide high voltage during programming, the programmer must be able to supply
current on this pin.
PIC16(L)F72X Memory Programming Specification
PIC16(L)F72X

PIC16F723-I/SO 数据手册

Microchip(微芯)
302 页 / 4.44 MByte
Microchip(微芯)
137 页 / 5.82 MByte
Microchip(微芯)
32 页 / 0.22 MByte
Microchip(微芯)
266 页 / 4.57 MByte
Microchip(微芯)
4 页 / 0.16 MByte
Microchip(微芯)
302 页 / 4.73 MByte
Microchip(微芯)
4 页 / 0.15 MByte

PIC16F723 数据手册

Microchip(微芯)
28 /40/ 44引脚闪存单片机采用纳瓦XLP技术 28/40/44-Pin Flash Microcontrollers with nanoWatt XLP Technology
Microchip(微芯)
MICROCHIP  PIC16F723A-I/SS  微控制器, 8位, 闪存, AEC-Q100, PIC16F7xxx, 20 MHz, 7 KB, 192 Byte, 28 引脚, SSOP
Microchip(微芯)
MICROCHIP  PIC16F723-I/SS  微控制器, 8位, PIC16F, 20 MHz, 7 KB, 192 Byte, 28 引脚, SSOP
Microchip(微芯)
MICROCHIP  PIC16F723-I/SO  微控制器, 8位, 闪存, PIC16F, 20 MHz, 7 KB, 192 Byte, 28 引脚, SOIC
Microchip(微芯)
MICROCHIP  PIC16F723A-I/SO  微控制器, 8位, 闪存, AEC-Q100, PIC16F7xxx, 20 MHz, 7 KB, 192 Byte, 28 引脚, SOIC
Microchip(微芯)
PIC16F722A/723A 8 位闪存微控制器Microchip 的 PIC16F 系列微控制器 8 位 MCU,将 Microchip 的 PIC® 体系架构融入到引脚和封装选件中,从节省空间的 14 引脚设备到功能丰富的 64 引脚设备。 带有基线、中级或增强型中级体系架构的设备提供多种不同的外围设备组合,可谓设计人员提供灵活性,并为应用提供选择。 PIC16F722A/723A 系列微控制器基于 Microchip 的中级内核,带 8 层深硬件堆栈和 35 个指令。 这些 MCU 提供高达 5 个 MIP、7 千字节程序存储器和 192 字节 RAM。 板载是一个振荡器,工厂校准到 ±1% 精确度。### 微控制器功能最大 20 MHz CPU 速度 35 指令 8 级硬件堆栈 25 个输入/输出引脚 nanoWatt XLP 技术 通电重置 (POR) 通电计时器 (PWRT) 掉电重置 (BOR) 监控器计时器 (WDT) 在线串行编程 (ICSP) 在线调试 (ICD) ### 外设11 通道 8 位模拟到数字转换器 (ADC) 8 通道 mTouchTM 感应振荡器模块 两个捕获、比较、PWM (CCP) 模块 两个 8 位计时器 一个 16 位计时器 可寻址通用同步异步接收器发送器 (AUSART) 同步串行端口 (SSP),带有 SPI 和 I2C
Microchip(微芯)
PIC16 8 位 微控制器 带7 KB 闪存 采用28引脚 SSOP封装
Microchip(微芯)
28引脚闪存单片机采用nanoWatt XLP技术 28-Pin Flash Microcontrollers with nanoWatt XLP Technology
Microchip(微芯)
PIC16F722/723/724/726/727 8 位闪存微控制器Microchip 的 PIC16F 系列微控制器 8 位 MCU,将 Microchip 的 PIC® 体系架构融入到引脚和封装选件中,从节省空间的 14 引脚设备到功能丰富的 64 引脚设备。 带有基线、中级或增强型中级体系架构的设备提供多种不同的外围设备组合,可谓设计人员提供灵活性,并为应用提供选择。 PIC16F722/723/724/726/727 系列微控制器基于 Microchip 的中级内核,带 8 层深硬件堆栈和 35 个指令。 这些 MCU 提供高达 5 个 MIP、14 千字节程序存储器和 368 字节 RAM。 板载是一个振荡器,工厂校准到 ±1% 精确度。### 微控制器功能最大 20 MHz CPU 速度 35 指令 8 级硬件堆栈 25 个输入/输出引脚 – PIC16F722/723/726 型号 36 个输入/输出引脚 – PIC16F724/727 型号 nanoWatt XLP 技术 通电重置 (POR) 通电计时器 (PWRT) 振荡器启动计时器 (OST) 掉电重置 (BOR) 监控器计时器 (WDT) 在线串行编程 (ICSP) 在线调试 (ICD) ### 外设8 位模拟到数字转换器 (ADC) - PIC16F722/723/726 11 通道、PIC16F724/727 14 通道 mTouchTM 电容式触摸传感振荡器模块 - PIC16F722/723/726 8 通道、PIC16F724/727 16 通道 两个捕获、比较、PWM (CCP) 模块 两个 8 位计时器 一个 16 位计时器 可寻址通用同步异步接收器发送器 (AUSART) 同步串行端口 (SSP),带有 SPI 和 I2C
Microchip(微芯)
PIC 20MHz 闪存:4K@x14bit
器件 Datasheet 文档搜索
器件加载中...
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册,每天更新 5,000 多个 PDF 文件