Datasheet 搜索 > 微控制器 > ST Microelectronics（意法半导体） > ST7FLITE35F2M6 数据手册 > ST7FLITE35F2M6 用户编程技术手册 4/97 页
器件3D模型￥ 7.132
ST7FLITE35F2M6 用户编程技术手册 - ST Microelectronics（意法半导体）
制造商:
ST Microelectronics（意法半导体）
分类:
微控制器
封装:
SOIC-20
描述:
STMICROELECTRONICS ST7FLITE35F2M6 微控制器, 8位, ST7, 8 MHz, 8 KB, 384 Byte, 20 引脚, SOIC
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
ST7FLITE35F2M6数据手册
Page:
of 97 Go
若手册格式错乱，请下载阅览PDF原文件
4/97
INTRODUCTION
ST7 DEVELOPMENT SUPPORT
The ST7 family of MCUs is supported by a com-
prehensive range of development tools. This fam-
ily presently comprises hardware tools (emulators,
programmers), a software package (assembler-
linker, debugger, archiver) and a C-compiler de
-
velopment tool.
The PC-compatible host system forms the plat-
form for the assemble r/ linker and for the symbolic
debugger; it also controls the emulator and ena
-
bles object code to be downloaded through the
RS232 serial link.
The real-time emulator is connected through the
probe to the target application. It provides the
proper electrical connections, thus allowing dupli
-
cation of the MCU’s functions in the target system.
The user program can be executed in real time, in
step-by-step mode, or by stepping over call
modes.
Breakpoints can be included on instructions, on
memory addresses, on address ranges, on the
state of one of two output triggers, as well as in
trap mode (automatic reset). A logical analyser
mode can record four input signals as external
events, using a 1K x 32-bit trace and six recording
modes, with or without breakpoints. In addition,
two output signals are available for synchronisa
-
tion and for timing measurement.
Each member of the ST7 family has an exclusive
probe, dedicated to the device and package. A re
-
mote programming tool is available to program
EPROM and OTP devices independently
(Epromer) or by batches of 10 parts (Gang pro
-
grammer).
The ST7 assembler is used to translate the source
code into relocatable machine code. It accepts a
source file written in ST7 assembly language and
transforms it into a linkable object file. The assem
-
bler recognizes the use of symbols, macros and
conditional assembly directives. The ST7 linker/
loader combines a number of object files into a
single program, associating an absolute address
to each section of code. It generates a binary file,
containing the image of the ST7 EPROM or ROM
memory content. The ST7 library archiver main
-
tains libraries of software object files. Libraries
may be used as entry for the linker/loader, togeth
-
er with object files. This allows the user to develop
standard modules for repetitive use. The ST7 exe
-
cutable file formatter is responsible for generating
an executable file. This file can be downloaded to
the emulator or, via the debugger, to the Eprom or
OTP device for evaluation and small volume pro
-
duction with the programmer or sent to STMicroe-
lectronics for production of ROM parts.
A C-compiler development environment is also
available. It includes an editor, a compiler, a linker,
a debugger and a simulator which are Windows
TM
compatible, and take full advantage of the ST7 ar-
chitecture to generate excellent quality code.
4
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
