Web Analytics
Datasheet 搜索 > 接口芯片 > Maxim Integrated(美信) > MAX4617CSE 数据手册 > MAX4617CSE 开发手册 1/26 页
MAX4617CSE
器件3D模型
26.614
MAX4617CSE数据手册
Page:
of 26 Go
若手册格式错乱,请下载阅览PDF原文件
February 2015 DocID027161 Rev 1 1/26
1
AN4617
Application note
Migrating between STM32F0 and STM32L0 microcontrollers
Introduction
For designers of STM32 microcontroller applications, it is important to be able to easily
replace one microcontroller type with another one of the same product family.
Migration of an application to a different microcontroller is frequent, because of new product
requirements: this usually requires increase of memory density, and of the I/Os number.
I/Os. On the other hand, cost reduction objectives may force the switch to smaller
components, or shrink of the PCB area. Another important factor is the effort to decrease
overall power consumption, especially if application is sensitive to that topic.
This application note is written to help users to analyze the steps needed to migrate from a
STM32F0 microcontroller to one of the STM32L0 series and vice versa. It summarizes the
most relevant informations and lists the vital aspects to be addressed.
To migrate an application between the STM32F0 and the STM32L0 series, user must
carefully analyze the hardware migration, the peripheral migration and then the firmware
migration.
To benefit fully from the information contained in this application note, the user should be
familiar with the STM32 microcontroller family, for this we recommend to look at the
following documents that are available on www.st.com:
the STM32F0 series reference manuals (RM0091 and RM0360) and STM32F0
datasheets;
the STM32L0 series reference manuals (RM0367, RM0376 and RM0377) and STM32L0
datasheets.
For an overview of the whole STM32 series and a comparison of the different features of
each STM32 product series, please refer to AN3364 “Migration and compatibility guidelines
for STM32 microcontroller applications”.
Table 1 lists the products concerned by this application note.
Table 1. Applicable products
Type Product series
Microcontrollers
STM32F0
STM32L0
www.st.com

MAX4617CSE 数据手册

Maxim Integrated(美信)
16 页 / 0.17 MByte
Maxim Integrated(美信)
16 页 / 0.23 MByte
Maxim Integrated(美信)
26 页 / 0.45 MByte

MAX4617 数据手册

Maxim Integrated(美信)
高速,低电压, CMOS模拟多路复用器/开关 High-Speed, Low-Voltage, CMOS Analog Multiplexers/Switches
Maxim Integrated(美信)
高速,低电压, CMOS模拟多路复用器/开关 High-Speed, Low-Voltage, CMOS Analog Multiplexers/Switches
Maxim Integrated(美信)
MAXIM INTEGRATED PRODUCTS  MAX4617CSE+  芯片, 模拟多路复用器, 单路, 8:1, NSOIC-16
Maxim Integrated(美信)
高速,低电压, CMOS模拟多路复用器/开关 High-Speed, Low-Voltage, CMOS Analog Multiplexers/Switches
Maxim Integrated(美信)
MAXIM INTEGRATED PRODUCTS  MAX4617EUE+  芯片, 模拟多路复用器, 单路, 8:1, TSSOP-16
Maxim Integrated(美信)
MAXIM INTEGRATED PRODUCTS  MAX4617CUE+..  芯片, 多路复用器, 8X1, 10Ω R(ON), 16TSSOP
Maxim Integrated(美信)
MAXIM INTEGRATED PRODUCTS  MAX4617CPE+  芯片, 模拟多路复用器, 单路, 8:1, DIP-16
Maxim Integrated(美信)
高速,低电压, CMOS模拟多路复用器/开关 High-Speed, Low-Voltage, CMOS Analog Multiplexers/Switches
Maxim Integrated(美信)
高速,低电压, CMOS模拟多路复用器/开关 High-Speed, Low-Voltage, CMOS Analog Multiplexers/Switches
Maxim Integrated(美信)
MAXIM INTEGRATED PRODUCTS  MAX4617ESE+  芯片, 模拟多路复用器, 单路, 8:1, NSOIC-16
器件 Datasheet 文档搜索
器件加载中...
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册,每天更新 5,000 多个 PDF 文件