Datasheet 搜索 > 贴片电阻 > TE Connectivity（泰科） > CRG0603F1K5 数据手册 > CRG0603F1K5 其他数据使用手册 1/4 页
器件3D模型￥ 0.022
CRG0603F1K5 其他数据使用手册 - TE Connectivity（泰科）
制造商:
TE Connectivity（泰科）
分类:
贴片电阻
封装:
0603
描述:
0603 型 CRG0603 系列 SMD厚膜电阻器 CRG 系列具有高功率尺寸比，特别适用于工业和一般用途 1Ω 至 10M 范围，1% 和 5% 容差。 还包括 0Ω 链路。 由于短引线结构和低电容，适用于大多数应用，包括高频操作 七种封装尺寸 接线端子表面：无光泽锡 湿度敏感性等级：2 级 70°C 时功率 | 0.1W ---|--- 电阻容差 | ±1% 温度系数 | ±100ppm/°C 工作温度 | -55°C → +125°C 极限元件电压 | 150V 跳线芯片电阻 | 50mΩ（最大值） 70°C 时电流 | 1A（仅零欧姆电阻器） 尺寸（长x宽x厚） | 1.6 x 0.8 x 0.45 mm ### 厚膜 - 0402/0603
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
标记信息在P3
应用领域在P2
导航目录
CRG0603F1K5数据手册
Page:
of 4 Go
若手册格式错乱，请下载阅览PDF原文件
Page 1 of 4
CUSTOMER LETTER
Restriction of Hazardous Substances (RoHS 2)
Dear Customer,
With respect to TE Connectivity’s activities to address the Restriction of Hazardous Substances in Electrical
and Electronic Equipment (RoHS) Directive, please be advised of the following:
Executive Summary
Directive 2011/65/EU (RoHS 2) entered into force on 21 July 2011 and became effective on 3 January
2013 repealing Directive 2002/95/EC (RoHS 1).
The expanded scope of RoHS 2 phases in the previously excluded categories of medical devices and
monitoring & control instruments, as well as certain cables. Additionally RoHS 2 requires, for finished EEE
1
,
the use of the CE mark to demonstrate compliance with the Directive.
Initially RoHS 2 set off with the same hazardous substances and the same maximum concentration limits
as RoHS 1. Therefore, all products meeting the substance restrictions of RoHS 1 remained compliant to the
substance restrictions of RoHS 2. On 24 June 2015, the new Delegated Directive 2015/863 entered into
force, adding 4 new substance restrictions to Annex II of RoHS 2. Those substance restrictions will come
into effect as off 22 July 2019.
The commentary below provides more detail related to TE Connectivity’s (TE) approach to ensure
compliance to RoHS 2.
Awareness and Focus
TE is aware of RoHS 2, which required Member States to transpose the provisions into their respective
national laws by 2 January 2013. TE monitored the developing implementation guidelines and national
transpositions and was actively engaged in efforts to further standardise the interpretation guidance
documents of both authorities and industry associations.
TE based its implementation of RoHS 2 on the Frequently Asked Questions (FAQ) document
2
, last updated
on 12 December 2012, from the official working group established by the Commission and Member States
at the 2011 RoHS/WEEE Technical Adaptation Committee meeting.
TE is also fully aware of the Commission Delegated Directive 2015/863 of 31 March 2015 amending Annex
II to Directive 2011/65 /EU as regards the list of restricted substances. This Directive requires Member
States to transpose the provisions into their respective national laws by 31 December 2016. TE will monitor
those transpositions and will implement accordingly, while working with our suppliers to conform to the
requirements ahead of the legal implementation date.
1
EEE = Electrical and Electronic Equipment
2
Link to the FAQ guidance: http://ec.europa.eu/environment/waste/rohs_eee/events_rohs3_en.htm.
July 2016
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
