Web Analytics
Datasheet 搜索 > 微控制器 > Microchip(微芯) > PIC18F14K22-I/P 数据手册 > PIC18F14K22-I/P 其他数据使用手册 1/387 页
PIC18F14K22-I/P
器件3D模型
20.618
导航目录
PIC18F14K22-I/P数据手册
Page:
of 387 Go
若手册格式错乱,请下载阅览PDF原文件
2009-2016 Microchip Technology Inc. DS40001365F-page 1
PIC18(L)F1XK22
High-Performance RISC CPU
C Compiler Optimized Architecture:
- Optional extended instruction set designed to
optimize re-entrant code
256 bytes Data EEPROM
Up to 16 Kbytes Linear Program Memory
Addressing
Up to 512 bytes Linear Data Memory Addressing
Up to 16 MIPS Operation
16-bit Wide Instructions, 8-bit Wide Data Path
Priority Levels for Interrupts
31-Level, Software Accessible Hardware Stack
8 x 8 Single-Cycle Hardware Multiplier
Flexible Oscillator Structure
Precision 16 MHz Internal Oscillator Block:
- Factory calibrated to ± 1%
- Software selectable frequencies range of
31 kHz to 16 MHz
- 64 MHz performance available using PLL –
no external components required
Four Crystal modes up to 64 MHz
Two External Clock modes up to 64 MHz
4X Phase Lock Loop (PLL)
Secondary Oscillator using Timer1 @ 32 kHz
Fail-Safe Clock Monitor
- Allows for safe shutdown if peripheral clock
stops
Two-Speed Oscillator Start-up
Special Microcontroller Features
2.3V - 5.5V Operation – PIC18F1XK22
1.8V-3.6V Operation – PIC18LF1XK22
Self-reprogrammable under Software Control
Power-on Reset (POR), Power-up Timer (PWRT)
and Oscillator Start-up Timer (OST)
Programmable Brown-out Reset (BOR)
Extended Watchdog Timer (WDT):
- Programmable period from 4 ms to 131s
Programmable Code Protection
In-Circuit Serial Programming™ (ICSP™) via
two pins
In-Circuit Debug via Two Pins
Extreme Low-Power Management
PIC18LF1XK22 with XLP Technology
Sleep mode: 34 nA
Watchdog Timer: 460 nA
Timer1 Oscillator: 650 nA @ 32 kHz
Analog Features
Analog-to-Digital Converter (ADC) module
- 10-bit resolution, 12 channels
- Auto-acquisition capability
- Conversion available during Sleep
Analog Comparator module:
- Two rail-to-rail analog comparators
- Independent input multiplexing
- Inputs and outputs externally accessible
Voltage Reference module:
- Fixed Voltage Reference (FVR) with 1.024V,
2.048V and 4.096V output levels
- 5-bit rail-to-rail resistive Digital-to-Analog
Converter (DAC) with positive and negative
reference selection
Peripheral Highlights
17 I/O Pins and 1 Input-only Pin:
- High current sink/source 25 mA/25 mA
- Programmable weak pull-ups
- Programmable interrupt-on- change
- Three external interrupt pins
Four Timer modules:
- Three 16-bit timers/counters with prescaler
- One 8-bit timer/counter with 8-bit period
register, prescaler and postscaler
- Dedicated, low-power Timer1 oscillator
Enhanced Capture/Compare/PWM (ECCP)
module:
- One, two or four PWM outputs
- Selectable polarity
- Programmable dead time
- Auto-shutdown and Auto-restart
- PWM output steering control
Master Synchronous Serial Port (MSSP) module
- 3-wire SPI (supports all four SPI modes)
-I
2
C Master and Slave modes (Slave mode
address masking)
Enhanced Universal Synchronous Asynchronous
Receiver Transmitter module (EUSART)
- Supports RS-232, RS-485 and LIN 2.0
- Auto-Baud Detect
- Auto Wake-up on Break
SR Latch (555 Timer) module with:
- Configurable inputs and outputs
- Supports mTouch
®
capacitive sensing
applications
20-Pin Flash Microcontrollers with XLP Technology

PIC18F14K22-I/P 数据手册

Microchip(微芯)
404 页 / 4.14 MByte
Microchip(微芯)
36 页 / 0.45 MByte
Microchip(微芯)
387 页 / 3.36 MByte
Microchip(微芯)
120 页 / 0.32 MByte

PIC18F14K22 数据手册

Microchip(微芯)
PIC18F1xK22 8 位闪存微控制器PIC18F2x1x/4x1x 系列微控制器基于 PIC18 体系结构,可提供 31 级硬件堆栈和 75 个说明。 这些 MCU 采用极低功耗技术,特别适用于低功耗至关重要的应用。### 微控制器功能最大 16 MIPS CPU 速度 75 指令 - 通过扩展指令集支持 83 指令 31 级硬件堆栈 可配置内部振荡器 - 可选频率范围 16 mHz 至 31 kHz 18 个输入/输出引脚 通电重置 (POR) 通电计时器 (PWRT) 振荡器启动计时器 (OST) 掉电重置 (BOR) 延长监控计时器 (WDT) 在线串行编程 (ICSP) 在线调试 (ICD) ### 极低功耗功能睡眠模式:34 nA 监控计时器:460 nA 计时器 1 振荡器:650 nA @ 32 kHz ### 外设10 位模拟到数字转换器 (ADC) – 12 通道 比较器模块 参考电压模块 三个 16 位计时器 一个 8 位计时器 一个增强型捕获、比较、PWM 模块 主同步串行端口 (MSSP) 模块,带有 SPI 和 I²C 增强型可寻址通用同步异步接收器发送器 (EUSART) SR 闩锁模块
Microchip(微芯)
MICROCHIP  PIC18F14K22-I/SO  微控制器, 8位, 闪存, AEC-Q100, PIC18FxxKxx, 64 MHz, 16 KB, 512 Byte, 20 引脚, SOIC
Microchip(微芯)
PIC18 系列 512 B RAM 16 kB 闪存 8位 微控制器 - QFN-20
Microchip(微芯)
8位 MCU微控制单元, PIC18 Microcontrollers, 64 MHz, 16 KB, 512 Byte, 20 引脚, SSOP
Microchip(微芯)
MICROCHIP  PIC18F14K22-I/ML  微控制器, 8位, 闪存, AEC-Q100, PIC18FxxKxx, 64 MHz, 16 KB, 512 Byte, 20 引脚, QFN
Microchip(微芯)
PIC18F1xK22 8 位闪存微控制器PIC18F2x1x/4x1x 系列微控制器基于 PIC18 体系结构,可提供 31 级硬件堆栈和 75 个说明。 这些 MCU 采用极低功耗技术,特别适用于低功耗至关重要的应用。### 微控制器功能最大 16 MIPS CPU 速度 75 指令 - 通过扩展指令集支持 83 指令 31 级硬件堆栈 可配置内部振荡器 - 可选频率范围 16 mHz 至 31 kHz 18 个输入/输出引脚 通电重置 (POR) 通电计时器 (PWRT) 振荡器启动计时器 (OST) 掉电重置 (BOR) 延长监控计时器 (WDT) 在线串行编程 (ICSP) 在线调试 (ICD) ### 极低功耗功能睡眠模式:34 nA 监控计时器:460 nA 计时器 1 振荡器:650 nA @ 32 kHz ### 外设10 位模拟到数字转换器 (ADC) – 12 通道 比较器模块 参考电压模块 三个 16 位计时器 一个 8 位计时器 一个增强型捕获、比较、PWM 模块 主同步串行端口 (MSSP) 模块,带有 SPI 和 I²C 增强型可寻址通用同步异步接收器发送器 (EUSART) SR 闩锁模块 ### PIC18 微控制器
Microchip(微芯)
PIC18 系列 48 MHz 16 kB 闪存 512 字节 SRAM 8 位 微控制器 - SSOP-20
Microchip(微芯)
PIC18F1xK22 8 位闪存微控制器PIC18F2x1x/4x1x 系列微控制器基于 PIC18 体系结构,可提供 31 级硬件堆栈和 75 个说明。 这些 MCU 采用极低功耗技术,特别适用于低功耗至关重要的应用。### 微控制器功能最大 16 MIPS CPU 速度 75 指令 - 通过扩展指令集支持 83 指令 31 级硬件堆栈 可配置内部振荡器 - 可选频率范围 16 mHz 至 31 kHz 18 个输入/输出引脚 通电重置 (POR) 通电计时器 (PWRT) 振荡器启动计时器 (OST) 掉电重置 (BOR) 延长监控计时器 (WDT) 在线串行编程 (ICSP) 在线调试 (ICD) ### 极低功耗功能睡眠模式:34 nA 监控计时器:460 nA 计时器 1 振荡器:650 nA @ 32 kHz ### 外设10 位模拟到数字转换器 (ADC) – 12 通道 比较器模块 参考电压模块 三个 16 位计时器 一个 8 位计时器 一个增强型捕获、比较、PWM 模块 主同步串行端口 (MSSP) 模块,带有 SPI 和 I²C 增强型可寻址通用同步异步接收器发送器 (EUSART) SR 闩锁模块 ### PIC18 微控制器
Microchip(微芯)
20引脚闪存单片机采用nanoWatt XLP技术 20-Pin Flash Microcontrollers with nanoWatt XLP Technology
Microchip(微芯)
20引脚闪存单片机采用nanoWatt XLP技术 20-Pin Flash Microcontrollers with nanoWatt XLP Technology
器件 Datasheet 文档搜索
器件加载中...
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册,每天更新 5,000 多个 PDF 文件