Datasheet 搜索 > ST Microelectronics（意法半导体） > STM32F413H-DISCO 数据手册 > STM32F413H-DISCO 其他数据使用手册 4/9 页
￥ 609.918
STM32F413H-DISCO 其他数据使用手册 - ST Microelectronics（意法半导体）
制造商:
ST Microelectronics（意法半导体）
封装:
TRAY
描述:
开发套件, STM32F4系列ARM® Cortex®-M4 MCU, 1.5Mb闪存, 板载ST-LINK/V2-1
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
STM32F413H-DISCO数据手册
Page:
of 9 Go
若手册格式错乱，请下载阅览PDF原文件
Overview of features TN1235
4/9 DocID029276 Rev 1
• SWIM cable for connection to the application via a pin header or a 2.54 mm pitch
connector.
• JTAG/serial wire debugging (SWD) specific features: 1.65 V to 3.6 V application
voltage supported on the JTAG/SWD interface and 5 V tolerant inputs.
• JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector.
• JTAG supported.
• SWD and serial wire viewer (SWV) communication supported.
• Direct firmware update feature supported (DFU).
• Status LED which blinks during communication with the PC.
• Operating temperature 0 to 50 °C.
• 1000 Vrms high isolation voltage (ST-LINK/V2-ISOL only).
2.3 The ST-LINK/V2-1 key features
The changes versus the ST-LINK/V2 version are listed below.
• New features supported on the ST-LINK/V2-1:
– USB software re-enumeration.
– Virtual-COM-port interface on USB.
– Mass storage interface on USB.
– USB power management request for more than 100 mA power-on USB.
• Features not supported on the ST-LINK/V2-1:
–SWIM interface.
– Minimum supported application voltage depends on hardware implementation. For
details, refer to the user manual of the board.
2.4 The ST-LINK/V2-A key features
The changes versus the ST-LINK/V2 version are listed below.
• New features supported on the ST-LINK/V2-A:
– Virtual-COM-port interface on USB, under conditions: refer to the user manual of
the board for details.
– Mass storage interface on USB.
• Features not supported on the ST-LINK/V2-A:
–SWIM interface.
– Minimum supported application voltage limited to 3 V.
– USB power management request for more than 100 mA power-on USB.
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
