Datasheet 搜索 > 电容排 > AVX（艾维克斯） > W2A4ZC104MAT2A 数据手册 > W2A4ZC104MAT2A 产品手册 1/7 页
￥ 0.498
W2A4ZC104MAT2A 产品手册 - AVX（艾维克斯）
制造商:
AVX（艾维克斯）
分类:
电容排
封装:
0508
描述:
AVX W2A4ZC104MAT2A 电容阵列, 0.1 µF, ± 20%, 4元件, 10 V, 0508 [1220公制], SMD
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
导航目录
W2A4ZC104MAT2A数据手册
Page:
of 7 Go
若手册格式错乱，请下载阅览PDF原文件
48
Capacitor Array
Capacitor Array (IPC)
AVX capacitor arrays offer designers the opportunity to
lower placement costs, increase assembly line output
through lower component count per board and to reduce
real estate requirements.
Reduced Costs
Placement costs are greatly reduced by effectively placing
one device instead of four or two. This results in increased
throughput and translates into savings on machine time.
Inventory levels are lowered and further savings are made
on solder materials, etc.
Space Saving
Space savings can be quite dramatic when compared to
the use of discrete chip capacitors. As an example, the
0508 4-element array offers a space reduction of >40% vs.
4 x 0402 discrete capacitors and of >70% vs. 4 x 0603
discrete capacitors. (This calculation is dependent on the
spacing of the discrete components.)
Increased Throughput
Assuming that there are 220 passive components placed in
a mobile phone:
A reduction in the passive count to 200 (by replacing
discrete components with arrays) results in an increase in
throughput of approximately 9%.
A reduction of 40 placements increases throughput by 18%.
For high volume users of cap arrays using the very latest
placement equipment capable of placing 10 components
per second, the increase in throughput can be very signifi-
cant and can have the overall effect of reducing the number
of placement machines required to mount components:
If 120 million 2-element arrays or 40 million 4-element arrays
were placed in a year, the requirement for placement
equipment would be reduced by one machine.
During a 20Hr operational day a machine places 720K
components. Over a working year of 167 days the machine
can place approximately 120 million. If 2-element arrays are
mounted instead of discrete components, then the number
of placements is reduced by a factor of two and in the
scenario where 120 million 2-element arrays are placed
there is a saving of one pick and place machine.
Smaller volume users can also benefit from replacing
discrete components with arrays. The total number of
placements is reduced thus creating spare capacity on
placement machines. This in turn generates the opportunity
to increase overall production output without further invest-
ment in new equipment.
W2A (0508) Capacitor Arrays
The 0508 4-element capacitor array gives a PCB space saving of over 40%
vs four 0402 discretes and over 70% vs four 0603 discrete capacitors.
W3A (0612) Capacitor Arrays
The 0612 4-element capacitor array gives a PCB space saving of over 50%
vs four 0603 discretes and over 70% vs four 0805 discrete capacitors.
AREA = 7.0mm
2
(0.276 in
2
) AREA = 3.95mm
2
(0.156 in
2
)
5.0 (0.197)
1.4
(0.055)
1.0
(0.039)
2.1 (0.083)
1.88
(0.074)
4 pcs 0402 Capacitors = 1 pc 0508 Array
AREA = 13.8mm
2
(0.543 in
2
) AREA = 6.4mm
2
(0.252 in
2
)
6.0 (0.236)
2.3
(0.091)
1.5
(0.059)
3.2 (0.126)
2.0
(0.079)
4 pcs 0603 Capacitors = 1 pc 0612 Array
BENEFITS OF USING CAPACITOR
ARRAYS
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
