Datasheet 搜索 > 微控制器 > Microchip（微芯） > PIC16F1778T-I/SO 数据手册 > PIC16F1778T-I/SO 用户编程技术手册 1/16 页
器件3D模型￥ 6.143
PIC16F1778T-I/SO 用户编程技术手册 - Microchip（微芯）
制造商:
Microchip（微芯）
分类:
微控制器
封装:
SOIC-28
描述:
8位微控制器 -MCU 8-Bit MCU, 28K Flash 2KB RAM, 10b ADC
Pictures:
3D模型
符号图
焊盘图
引脚图
产品图
页面导航:
原理图在P1
应用领域在P10
导航目录
PIC16F1778T-I/SO数据手册
Page:
of 16 Go
若手册格式错乱，请下载阅览PDF原文件
2016 Microchip Technology Inc. DS90003140B-page 1
TB3140
INTRODUCTION
A voltage ramp signal finds its purpose in a circuit
application that requires a linear change of voltage. It is
commonly used as a reference signal, slope
compensator or a voltage sweep generator. The
Programmable Ramp Generator (PRG) peripheral
provides voltage ramp signals with no processor
overhead. The PRG can produce a falling ramp, a
rising ramp or alternating rising/falling ramp triggered
from many input sources. A programmable current
source/sink selects the slope rate of the PRG output.
This technical brief provides a straightforward
discussion on the PRG features, method of
configuration and sample applications for different
modes of operation.
BLOCK DIAGRAM
In the block diagram shown in Figure 1, the PRG’s
ramp generation function works by driving a constant-
current into the internal capacitor. The resulting voltage
across this internal capacitor is added to or subtracted
from the voltage input source. The mode of operation
of the ramp output relies mainly on the control of
internal analog switches. The duration between the
moment the ramp starts and stops is determined by the
input timing sources.
FIGURE 1: PRG SIMPLIFIED BLOCK DIAGRAM
Author: Kristine Angelica Sumague
Microchip Technology Inc.
VOLTAGEINPUT
SOURCE
MODESELECTION
INPUTTIMINGSOURCES
Set_falling
TimingSource
PPS
PRGxF
PRGxFPPS
FTSS<3:0>
RPOL
FPOL
EN
SQ
R
Switch
Control
REDG
FEDG
GO
OS
MODE<1:0>
VDD
Voltage
Sources
PRGxIN
INS<3:0>
voltage_ref
SW1
SW2
SW3
RAMPx_out
to
peripherals
PRGCurrentSource
ISET<4:0>
PRGCurrentSink
ISET<4:0>
Set_rising
TimingSource
PPSPRGxR
PRGxRPPS
RTSS<3:0>
Note: SW1 discharges the internal capacitor.
SW2 is closed and SW3 is open during Rising Ramp Generator mode.
SW3 is closed and SW2 is open during Falling Ramp Generator mode.
SW2 and SW3 alternate switching during alternating Rising/Falling Ramp Generator mode.
Programmable Ramp Generator Technical Brief
器件 Datasheet 文档搜索
AiEMA 数据库涵盖高达 72,405,303 个元件的数据手册，每天更新 5,000 多个 PDF 文件
